The Largest IN-STOCK FLOW METER Warehouse + Ships Same Day!

Authorized Distributor of FLOMEC & GPI Flow Meters

G2P10NQ9GMA

1" NPT Female PVDF Digital Chemical Flow Meter

1" NPT Female PVDF

Rate & Totals G2 Series - INDUSTRIAL GRADE METER - FOR AGGRESSIVE CHEMICALS

$1049.00
In Stock
Lead Time: Same or Next Day
See New/Alternate Model No: G2P10NQ9GMV
Main Specifications
Connection Size: 1"
Connection Type: NPT Female
Flow Range: 5 - 50 GPM (18.9 - 190 LPM)
Pressure Rating: 100 PSI (6.8 Bar)
Operating Temp With Local Computer:
0 to 140°F (-18 to 60°C) for SAFE AREA (Non-FM Approved)
0 to 129°F (-18 to 54°C) for INTRINSICALLY SAFE (FM Approved)
See Catalog Page link to the left
Meter Body Size: 1"
Local/Remote Display: Local
Display Type: Digital LCD
Factory Calibrated For: Water like fluids
Flow Meter Type: G2 Series - INDUSTRIAL GRADE METER - FOR AGGRESSIVE CHEMICALS
Std Calibration Reports Included: Yes
Application/Flow: Call concerning DI Water applications
Warranty Period: 1 Year
Product Type: Rate & Totals
Benefits & Features: Can Handle Aggressive Chemicals; Accurate; 2-Year Battery Powered; 6 Digit Display - Floating Decimal; Rate of Flow; Batch & Cumulative Totals; Factory Calibrated and Field Calibratable; Add-On Output Options; FM Approved Class I, Div. I; Replaceable Internal Meter Body Parts; Choice of Gallons or Liters; Custom Programmable Display (including UOM)
Max Pressure Drop (at Max Flow in test conditions): 6.5 PSI
Accuracy (% of Reading) Factory Calibrated with Computer: ± 1.0%
Accuracy (% of Reading) Factory Calibrated Body Only: ± 1.5%
Repeatability (based on test conditions): ± 0.3%
Recommended Strainer Size: 35 Mesh (500 Microns)
Max. Particle Size: .018" / .457 mm
Operating Temp Without Local Computer or With Remote Computer: -20 to 180°F (-28 to 82°C) [Opt'l]
Extended Flow Range: 50 - 75 GPM (190 - 284 LPM)<br>[Accuracy of the extended flow range declines and is not guaranteed]<br>Overranging damages meter and voids warranty
Maximum Viscosity: 100 cps<br>[For viscous fluids like oils, the temperature must not fluctuate more than ±5°F to avoid accuracy fluctuations]
Housing Material: PVDF
Bearings: Ceramic - 98% Alumina
Shaft: Ceramic - 98% Alumina
Rotor: PVDF
Signal Generator: Not Wetted
Seals: Fluorocarbon (PTFE Optional)
Display Function: Rate + 2 Totals (1 Resettable, 1 Cumulative)
Local Computer Calibrations: Factory & Field
LCD Digits: 6
Totalizing Display Starting Increment: 0.01
Typical K-Factor PPG (PPL): 540 (143)
Local Module & Output Signal: None
Remote Output: Optional Remote Display, 4-20mA or Pulse Out (Please contact us)
Sensor (Pickup): Magnetic
Battery Power: (2) AAA 1.5V Alkaline Battery (2 year)
Frequency Range: 45 - 450 Hz
Totalizing Resets to 0 After Reaching: 99999999
Applications (always check Chemical Compatibility Guide): Bleach, Phosphoric Acid, Some Sulfuric Acid Concentrations, Ferric Chloride, Phenol, DI Water rated < 12 M-Ohms
Not Suitable For Applications: Oils, especially those heavier than 10W (100cps), Fluctuating viscosities**
Minimum Straight Pipe Dia.s: 10" Upstream / 5" Downstream
Desired Straight Pipe Dia.s: 20" Upstream / 10" Downstream
Application Notes: Unidirectional but Display can be rotated 180°, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Line should be kept full (no air) for proper accuracy
Piping Notes: If cavitation affects accuracy, try a flow control valve downstream of meter
Connection to Connection Length (OAL): 8.1" (206 mm)
Shipping Weight (Approximate): 1.9 lbs (0.9 kg)
Approvals Notes: See catalog page for full approval specs