The Largest IN-STOCK FLOW METER Warehouse + Ships Same Day!

Authorized Distributor of FLOMEC & GPI Flow Meters

GNT-100HC-X

1" NPT Male 316SS (limited availability)

Contact us for availability

Pulse Out G Series - PRECISON METER - HIGH PRESS. & TEMP.

No longer available.

Lead Time: Discontinued
Main Specifications
Connection Size: 1"
Connection Type: NPT Male
Flow Range: 6.7 - 67 GPM (25.2 - 252 LPM)

Limited availability
Contact us
Pressure Rating: 5000 PSI (340 Bar)
Meter Body Size: 1"
Local/Remote Display: None
Display Type: None
Factory Calibrated For: Water like fluids
Flow Meter Type: G Series - PRECISON METER - HIGH PRESS. & TEMP.
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Pulse Out
Benefits & Features: High Accuracy: ± 0.5% (Linearity), High Temperatures to 800°F, Low Temperatures to -450°F, Field Serviceable, Cleanable Internals
Extended Flow Range: See pg 4 of manual for details
Max Pressure Drop (at Max Flow in test conditions): 38 PSI
Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5%
Repeatability (based on test conditions): ± 0.1%
Maximum Viscosity: 100 cps**
Recommended Strainer Size: 40 Mesh (420 Microns)
Max. Particle Size: .017" / .420 mm
Operating Temp Without Local Computer or With Remote Computer: -450 to 800°F (-268 to 426°C)
Housing Material: 316SS (limited availability)<br><br>Contact us for availability
Bearings: Tungsten Carbide
Shaft: Tungsten Carbide
Thrust Bearings: Tungsten Carbide
Rotor: CD4MCu Stainless Steel
Rotor Supports: 316SS
Signal Generator: Not Wetted
Retaining Rings: 302SS/316SS
Local Computer Calibrations: Factory
Typical K-Factor PPG (PPL): 896
Local Module & Output Signal: None
Remote Output: None
Sensor (Pickup): Magnetic
Frequency Range: 100 - 1000 Hz
Applications (always check Chemical Compatibility Guide): Industrial Use, Water
Not Suitable For Applications: Oils, especially those heavier than 10W (100cps), Fluctuating viscosities**
Application Notes: Unidirectional, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Line must be full (no air) for proper accuracy
Piping Notes: If pump, valve, etc. is upstream, need min. 20" Upstream
Minimum Straight Pipe Dia.s: 10" Upstream / 5" Downstream
Connection to Connection Length (OAL): 3.562" (90.5 mm)
Shipping Weight (Approximate): 4 lbs (1.8 kg)