The Largest IN-STOCK FLOW METER Warehouse + Ships Same Day!

Authorized Distributor of FLOMEC & GPI Flow Meters

OM004H513-222

1/8" NPT Female 316SS

Pulse Out OM Series - OVAL GEAR - HIGH PRESSURE

$1252.00
Lead Time: 4-6 Weeks
Main Specifications
Connection Size: 1/8"
Connection Type: NPT Female
Flow Range: 0.13 - 9.5 GPH (0.5 - 36 LPH)
Pressure Rating: 5800 PSI (400 Bar)
Meter Body Size: 1/8"
Local/Remote Display: None
Display Type: None
Flow Meter Type: OM Series - OVAL GEAR - HIGH PRESSURE
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Pulse Out
Benefits & Features: Excellent for applications with fluctuating or multiple viscosities - No field calibrating required; Accuracy: ± 1% Of Reading; Up to 1,000 cps Viscosity; No straight pipe requirements; Bi-directional; SS Rotors are very stable with increasing temperatures
Max Pressure Drop (at Max Flow in test conditions): Contact us
Accuracy (% of Reading) Factory Calibrated with Computer: ± 1% @ 3cp
Repeatability (based on test conditions): ± 0.03%
Maximum Viscosity: 1,000 cps
Recommended Strainer Size: 200 Mesh (75 Microns)
Max. Particle Size: .003" / .074 mm
Operating Temp Without Local Computer or With Remote Computer: 5 to 250°F (-15 to 120°C)
Housing Material: 316SS
Bearings: Carbon Ceramic
Shaft: Stainless Steel
Rotor: 316SS
Seals: PTFE encapsulated FKM
Typical K-Factor PPG (PPL): 10600 (2800)
Local Module & Output Signal: Open Collector (NPN) Unscaled Pulse
Remote Output: None
Sensor (Pickup): Reed Switch / Hall Effect<br>[Hall Effect Sensor requires dedicated power source]
Applications (always check Chemical Compatibility Guide): Metering clean fluids such as water based liquids for Chemical, Cosmetic, Food, and Pharmaceutical Industries
Not Suitable For Applications: Dirty liquids
Minimum Straight Pipe Dia.s: None
Desired Straight Pipe Dia.s: None
Application Notes: The meter may be mounted horizontally or vertically but must be mounted, so the rotor shafts are in a horizontal plane (see manual), For viscous liquids, the maximum allowable flow may need to be reduced to ensure the pressure drop across the meter does NOT exceed 15 PSI, Viscosities <3cps, min. flow range is 10% of the maximum flow range, Line must be full (no air) for proper accuracy
Connection to Connection Length (OAL): 2.91" (74mm)
Shipping Weight (Approximate): 5 lbs (2.3 kg)
Approvals Notes: CE Approval is applied when meter is part of a system