The Largest IN-STOCK FLOW METER Warehouse + Ships Same Day!

Authorized Distributor of FLOMEC & GPI Flow Meters

OM100A001-821R5G

4" NPT Female Aluminum

Rate, Totals & 4-20mA Output OM Series - OVAL GEAR

$5514.00
Lead Time: 4-6 Weeks
Main Specifications
Connection Size: 4"
Connection Type: NPT Female
Flow Range: 20 - 400 GPM (75-1500 LPM)
Pressure Rating: 145 PSI (10 Bar)
Operating Temp With Local Computer: 5 to 176°F (-15 to 80°C)
Meter Body Size: 4"
Local/Remote Display: Local
Display Type: Digital LCD (GRN Housing)
Flow Meter Type: OM Series - OVAL GEAR
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Rate, Totals & 4-20mA Output
Benefits & Features: Excellent for applications with fluctuating or multiple viscosities - No field calibrating required; Accuracy: ± 0.5% Of Reading; Up to 1,000 cps Viscosity; No straight pipe requirements; Bi-directional; PPS Rotors are immune to galling (adhesive wear); PPS Rotors produce less noise than metal rotors; 6 Digit Display - Floating Decimal; Rate of Flow; Batch & Cumulative Totals; Choice of Gallons or Liters; Custom Programmable Display (including UOM); Back-lighted Display when powered externally
Max Pressure Drop (at Max Flow in test conditions): Contact us
Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5% (±0.2% Opt'l) @ 3cp
Repeatability (based on test conditions): ± 0.03%
Maximum Viscosity: 1,000 cps
Recommended Strainer Size: 45 Mesh (350 Microns)
Max. Particle Size: .014" / .354 mm
Operating Temp Without Local Computer or With Remote Computer: 5 to 250°F (-15 to 120°C) [Opt'l]
Housing Material: Aluminum
Bearings: None
Shaft: Stainless Steel
Rotor: PPS
Seals: FKM (Viton™)
Display Function: Rate + 2 Totals (1 Resettable, 1 Cumulative)
Totalizing Display Starting Increment: 0.01
Typical K-Factor PPG (PPL): Reed: 4.15 (1.10), Hall Effect: 16.6 (4.40)
Local Module & Output Signal: 4-20 mA Output, Selectable Pulse Output (RT14)
Remote Output: None
Battery Power: (1) Lithium Thionyl Chloride 3.6V size AA battery (~3 years)
External Power: 12-30 VDC (optional)
Totalizing Resets to 0 After Reaching: 99999999
Sensor (Pickup): Reed Switch / Hall Effect<br>[Hall Effect Sensor requires dedicated power source]
LCD Digits: 8
Applications (always check Chemical Compatibility Guide): Metering clean fluids such as Oils, Grease, Fuels, Fuel Oils, Lubricating Liquids
Not Suitable For Applications: Water, dirty liquids
Minimum Straight Pipe Dia.s: None
Desired Straight Pipe Dia.s: None
Application Notes: The meter may be mounted horizontally or vertically but must be mounted, so the rotor shafts are in a horizontal plane (see manual), For viscous liquids, the maximum allowable flow may need to be reduced to ensure the pressure drop across the meter does NOT exceed 15 PSI, Viscosities <3cps, min. flow range is 10% of the maximum flow range, Line must be full (no air) for proper accuracy
Connection to Connection Length (OAL): 11.6" (294mm)
Shipping Weight (Approximate): 54 lbs (24.5 kg)
Approvals Notes: CE Approval is applied when meter is part of a system