The Largest IN-STOCK FLOW METER Warehouse + Ships Same Day!

Authorized Distributor of FLOMEC & GPI Flow Meters

OM100A101-222

4" NPT Female Aluminum

Pulse Out OM Series - OVAL GEAR - HIGH VISCOSITY

$5523.00
Lead Time: 4-6 Weeks
Main Specifications
Connection Size: 4"
Connection Type: NPT Female
Flow Range: 20 - 400 GPM (75-1500 LPM)
Pressure Rating: 145 PSI (10 Bar)
Meter Body Size: 4"
Local/Remote Display: None
Display Type: None
Flow Meter Type: OM Series - OVAL GEAR - HIGH VISCOSITY
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Pulse Out
Benefits & Features: Excellent for applications with fluctuating or multiple viscosities - No field calibrating required; Accuracy: ± 0.5% Of Reading; Up to 1,000,000 cps Viscosity; No straight pipe requirements; Bi-directional; PPS Rotors are immune to galling (adhesive wear); PPS Rotors produce less noise than metal rotors
Max Pressure Drop (at Max Flow in test conditions): Contact us
Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5% @ 3cp
Repeatability (based on test conditions): ± 0.03%
Maximum Viscosity: 1,000,000 cps
Recommended Strainer Size: 45 Mesh (350 Microns)
Max. Particle Size: .014" / .354 mm
Operating Temp Without Local Computer or With Remote Computer: 5 to 250°F (-15 to 120°C)
Housing Material: Aluminum
Bearings: None
Shaft: Stainless Steel
Seals: FKM (Viton™)
Rotor: PPS (Hi Viscosity)
Typical K-Factor PPG (PPL): Reed: 4.15 (1.10), Hall Effect: 16.6 (4.40)
Local Module & Output Signal: Open Collector (NPN) Unscaled Pulse
Remote Output: None
Sensor (Pickup): Reed Switch / Hall Effect<br>[Hall Effect Sensor requires dedicated power source]
Applications (always check Chemical Compatibility Guide): Metering clean fluids such as Oils, Grease, Fuels, Fuel Oils, Lubricating Liquids
Not Suitable For Applications: Water, dirty liquids
Minimum Straight Pipe Dia.s: None
Desired Straight Pipe Dia.s: None
Application Notes: The meter may be mounted horizontally or vertically but must be mounted, so the rotor shafts are in a horizontal plane (see manual), For viscous liquids, the maximum allowable flow may need to be reduced to ensure the pressure drop across the meter does NOT exceed 15 PSI, Viscosities <3cps, min. flow range is 10% of the maximum flow range, Line must be full (no air) for proper accuracy
Connection to Connection Length (OAL): 11.6" (294mm)
Shipping Weight (Approximate): 52 lbs (23.6 kg)
Approvals Notes: CE Approval is applied when meter is part of a system