GSCP-05175A-X1 3/4" Tri-Clamp Chemical Turbine 316SS Flow Meter
3/4" Tri-Clamp 316SS (contact us for availability or see closest new model)
Search for
GSCPS-100-DM-10F
Pulse Out G Series - PRECISON METER
Main Specifications
Connection Size: 3/4"
Connection Type: Tri-Clamp
Flow Range: 0.8 - 6 GPM (3.0 - 22 LPM)
Limited availability
Please contact us
Limited availability
Please contact us
Pressure Rating: 150 PSI (10.2 Bar)
Meter Body Size: 1/2"
Body Type: Non 3-A
Local/Remote Display: None
Display Type: None
Factory Calibrated For: Water like fluids
Flow Meter Type: G Series - PRECISON METER
Std Calibration Reports Included: Yes
Warranty Period: 1 Year
Product Type: Pulse Out
Benefits & Features: High Accuracy: ± 0.5% (Linearity), Tri-Clamp Clamp, Field Serviceable, Cleanable Internals
Extended Flow Range: See pg 4 of manual for details
Max Pressure Drop (at Max Flow in test conditions): Contact us
Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5%
Repeatability (based on test conditions): ± 0.1%
Maximum Viscosity: 100 cps**
Recommended Strainer Size: 40 Mesh (420 Microns)
Max. Particle Size: .017" / .420 mm
Operating Temp Without Local Computer or With Remote Computer: -100 to 185°F (-74 to 85°C)
Housing Material: 316SS (contact us for availability or see closest new model)<br><br>Search for<br>GSCPS-100-DM-10F
Bearings: PTFE
Shaft: 316SS
Thrust Bearings: 440C Stainless Steel
Rotor: CD4MCu Stainless Steel
Rotor Supports: 316SS
Signal Generator: Not Wetted
Retaining Rings: 302SS/316SS
Local Computer Calibrations: Factory
Local Module & Output Signal: None
Remote Output: None
Sensor (Pickup): Digital Magnetic (Requires Power: 5-32VDC)
Frequency Range: 100 - 1000 Hz
Typical K-Factor PPG (PPL): 10000
Applications (always check Chemical Compatibility Guide): Pre-process applications where high accuracy is required without 3-A Approval, Water, Beer, Wine
Application Notes: Unidirectional, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Line must be full (no air) for proper accuracy
Piping Notes: If pump, valve, etc. is upstream, need min. 10" Upstream
Minimum Straight Pipe Dia.s: 5" Upstream / 2.5" Downstream
Connection to Connection Length (OAL): 2.75" (69.9 mm)
Shipping Weight (Approximate): 3 lbs (1.4 kg)
Approvals Notes: For 3-A Approved Meters please see GSCPS meters