The Largest IN-STOCK FLOW METER Warehouse + Ships Same Day!

Authorized Distributor of FLOMEC & GPI Flow Meters

A1Q9GMX025XB3
Q9 Computer Display for A1 1" Low Flow Aluminum or Nylon Body (.3-3 GPM)

(Replacement for Q9 computer display only)

$432.00
Lead Time: 1-3 Weeks
Features & Benefits
  • Kit consists of Computer Display, batteries, O'ring seal, gasket, screws, manual and declaration of conformity (does not contain sensor)
  • Fits A1 Aluminum or Nylon bodies only. Replaces LCD computer display labeled A1Q9GMA025NA1, A1Q9GMN025NA1, A1Q9LMA025NA1, A1Q9LMN025NA1 or A1Q9GMX025XB3
  • LCD Computer Display programmed to display in Gallons Per Minute. Flowrate display updates every 5 seconds, readout is in units/minute. Factory Calibration in gallons and liters is standard. Can be field calibrated to adjust to various fluid viscosities. Correction calibration lets end user calibrate by ± percent off.
  • Internal Power: (2) 1.5V Akaline batteries. Battery life (2 years). Std Factory Configuration: 2 Totals (1 Resettable, 1 Cumulative). Factory Calibration in gallons and liters. Totalizing Registers: 0 to 2, K-Factor Limits: Min: .01 pulses/unit Max: 999,999 pulses/unit. Field Calibrate by user. Standard Method: Correction Factor. Six adjustable digits. Can be reconfigured to K-factor entry. Readouts: LCD with floating decimal. Minimum Display = 0.01 units Maximum Display = 999,999 units (6 digits). Impulse Rate: Minimum (Pulse-in Input) = DC (0 Hz) Minimum (Coil Input) = Approximately 10 Hz Maximum = Approximately 1,000 Hz. Storage Temperature: -40 F to 158 F (-40 C to 70 C). Note: Part number is dependent on material and size of flow meter.
  • IF NOT CERTAIN THAT YOU ARE REPLACING THE Q9 COMPUTER DISPLAY, PURCHASE PART NO. A1R9GMX025XB3


0 F to 140 F (-18 C to 60 C)