Benefits & Features: High Accuracy: ± 0.5% (Linearity), High Temperatures to 800°F, Low Temperatures to -450°F, Field Serviceable, Cleanable Internals. Includes 3' Cable.

Extended Flow Range: See pg 4 of manual for details

Max Pressure Drop (at Max Flow in test conditions): Contact us

Accuracy (% of Reading) Factory Calibrated with Computer: ± 0.5%

Repeatability (based on test conditions): ± 0.1%

Maximum Viscosity: 100 cps**

Recommended Strainer Size: 40 Mesh (420 Microns)

Max. Particle Size: .017" / .420 mm

Operating Temp Without Local Computer or With Remote Computer: -100 to 185°F (-74 to 85°C)

Housing Material: 316SS (limited availability)<br><br>Contact us for availability

Bearings: PTFE

Shaft: 316SS

Thrust Bearings: 440C Stainless Steel

Rotor: CD4MCu Stainless Steel

Rotor Supports: 316SS

Signal Generator: Not Wetted

Retaining Rings: 302SS/316SS

Local Computer Calibrations: Factory

Local Module & Output Signal: 4-20mA Transmitter (GA510)

Remote Output: None

Sensor (Pickup): Magnetic

External Power: 2-Wire Loop Powered 8.5-35 VDC

Frequency Range: 100 - 1000 Hz

Typical K-Factor PPG (PPL): 10000

Applications (always check Chemical Compatibility Guide): Chemicals, Water, DI Water

Not Suitable For Applications: Oils, especially those heavier than 10W (100cps), Fluctuating viscosities**

Application Notes: Unidirectional, Can mount Horizontally or Vertically, Can use for Gravity Feeds, Line must be full (no air) for proper accuracy

Piping Notes: If pump, valve, etc. is upstream, need min. 10" Upstream

Minimum Straight Pipe Dia.s: 5" Upstream / 2.5" Downstream

Connection to Connection Length (OAL): 2.75" (69.9 mm)

Shipping Weight (Approximate): 5 lbs (2.3 kg)

GNP-050SA-72

1/2" NPT Male 316SS (limited availability)Contact us for availability

4-20mA Output G Series - PRECISON METER - HIGH PRESSURE

1/2" NPT Male 316SS (limited availability)

Contact us for availability